Oilite sintered plates
Provides self-lubricating thrust surfaces especially in applications where assembly does not lend itself to the use of a flanged bearing. Alternatively can provide a second thrust surface at the non-flanged end of a bearing.
In thrust applications PV should not exceed 0.36 N/mm2 × m/s. Surface velocity (m/s) calculated on mean diameter of thrust face and pressure (N/mm2) on total thrust area.
We also offer specialised machining service for special sizes of bearings according to customers specific requirements.
Matching Bearings
| Material | Unit Measurement | Part Number | Width | Thickness | Length | Tolerance Range | Action Button |
|---|---|---|---|---|---|---|---|
| Oilite Plates | Imperial | AP 08 40 04 | 0.5 | 0.25 | 2.5 | ||
| Oilite Plates | Imperial | AP 16 68 02 | 1 | 0.125 | 4.25 | ||
| Oilite Plates | Imperial | AP 16 68 12 | 1 | 0.75 | 4.5 | ||
| Oilite Plates | Imperial | AP 32 130 04 | 2 | 0.25 | 8.125 | ||
| Oilite Plates | Imperial | AP 48 192 12 | 3 | 0.75 | 12 | ||
| Oilite Plates | Imperial | AP 50 08 63 | 5 | 0.625 | 8 | ||
| Oilite Plates | Imperial | AP 80 128 08 | 5 | 0.5 | 8 | ||
| Oilite Plates | Imperial | AP 80 128 10 | 5 | 0.625 | 8 | ||
| Oilite Plates | Imperial | AP 80 96 02 | 5 | 0.125 | 6 | ||
| Oilite Plates | Imperial | AP 80 96 06 | 5 | 0.375 | 6 | ||
| Oilite Plates | Imperial | AP 80 96 16 | 5 | 1 | 6 | ||
| Oilite Plates | Imperial | AP 96 192 03 | 6 | 0.1875 | 12 | ||
| Oilite Plates | Imperial | AP 96 192 04 | 6 | 0.25 | 12 | ||
| Oilite Plates | Imperial | AP 96 192 10 | 6 | 0.625 | 12 | ||
| Oilite Plates | Imperial | AP 96 192 12 | 6 | 0.75 | 12 | ||
| Oilite Plates | Imperial | AP 96 192 16 | 6 | 1 | 12 |
